How to Configure the IP sec VPN

Administrator Apr-12th, 2019 10:41 1 0

Steps to be followed:

  1.  Login to K7 Security UTM, Click on Configuration
  2.  Click on the VPN Navigate to IPSec-VPN
  3.  Provide the Name and description for desired VPN
  4.  Provide the IPsec Mode as Main
  5.  Mention the local IP needs to route to branch as same in the Remote side
  6.  Disable the Nat Traversal and select the Local wan connection as Static IP and provide the WAN IP. (Gateway Local id is optional)
  7.  Similarly, Configure Remote side WAN IP and Gateway and under remote WAN IP Configure as auto detect / provide the gateway
  8.  Generate the Pre shared key and provide to the branch side configuration both same
  9.  In IKE mode make it as main and Configure Key Exchange mode as Auto and create the Phase 1 and Phase 2.

  10. After making the necessary configuration, Click Save and Restart Service

Note: If the issue persists or you need any assistance, you may raise ticket at Submit a Ticket and Our Support Team will get in touch with you shortly to assist you.


Was this article helpful?
1 out of 1 found this helpful

Leave a comment